Each Demo board includes the following:

• Two momentary pushbuttons
• Two slide switches
• Four LEDs
• Jumper to enable / disable Power Amplifer (PA)
• Jumper to enable / disable Low Noise Amplifier (LNA)
• Low noise voltage regulator
• Power switch (battery or USB power)
• Battery holder (requires 3 AAA batteries)
• Analog temperature sensor
• Potentiometer (simulates analog sensor)
• RS-232 port with a female DB9 connector
• USB port with an industry standard B-type connector
• BDM programming connector (used to program the ZigRay™ transceiver)

Two Demo Kits are available. One includes two Demo boards with ZigRay™ transceivers installed. The other adds two polycarbonate enclosures. A CD containing additional hardware and software documentation is also provided.

Tecnova offers product design and development, and can design a custom solution to meet OEM-specific requirements.

RS-232 connector: DB9 female
Pin 2: TXD (output)
Pin 3: RXD (input)
Pin 5: common
Pins 1, 4, 6: jumpered
Pins 7, 8, 9: jumpered
Pins 10, 11: shield

USB connector: Industry standard USB-B

Operating Voltage: 3.85V to 5.5V DC

Batteries: 3 AAA

Power Consumption - Demo Board only:
55mA maximum

Power Consumption - with ZigRay™:
155mA maximum

Size: 4.4" L X 2.1" W X 1.75" H
(112mm X 53mm X 45mm)

Operating Temperature: 0°C to +70°C

Specifications subject to change
without notice.

(Rev 17-Oct-2006)